WTTTL Ltd
Electrical Inspection & Testing. WTTTL Ltd has been vetted and approved by TrustATrader. Covering Norfolk
Membership number TT24360
Don't forget! Please mention TrustATrader when you contact any of our trusted traders.
All TrustATrader members are checked and vetted!
Get extra peace of mind and cover your next agreed job with this trader for free by registering for the TrustATrader Guarantee. Find out more
Register GuaranteeAbout WTTTL Ltd, Norwich, NR7 0JG
A major problem I hear so often is that people struggle to find a good, reputable electrician that will:
Turn Up On Time
Do the Job Well
Charge a Fair Price
W3tl will always put the customer experience first. If you are in the market for an electrician and want a good honest service then perhaps we had better have a chat.
My name is Ben, with 15+ years of experience in domestic and small business electrical systems I bring a wealth of knowledge that homeowners and SME's can rely on
Finding a reliable electrician in Norfolk can be a minefield. With so many sole traders and companies to choose from it can be hard to know who to trust.
We are:
- Fully insured to £2M
- Level 3 qualified with City & Guilds
- Registered with the NICEIC as an Approved Contractor
We offer a comprehensive range of electrical services including:
- New and additional wiring to homes
- New build wiring to homes and outbuildings
- Light fixture changes and additional plug sockets
- Electrical Testing
- Garden Lighting
Calling w3tl will put you through to Ben
- I will answer with the company name. If I don't answer its likely because I am with a customer. I WILL call you back
- To book a quote, I will need your home address
- I will happily answer questions you are unsure about before any commitment is made
If you would like to fill in a form, my response time in around a half day as I may be on-site or with other customers. You WILL get a response
Photo gallery
-
Image
1
- New unit fitted and labelled
-
Image
2
- Protection for the lounge whilst we cut into the walls
-
Image
3
- We've bonded the walls - just need a decorator now. You could get a plasterer in, but these walls, whilst not great to look at, does mean the walls are at least sealed
-
Image
4
- Laser line to ensure its all level. Nothing worse than a wonky socket
-
Image
5
- This is a sub main wired in for a garage. Wireless lighting control was used - because its easier
-
Image
6
- Lids on, labels fitted - Job done
-
Image
7
- We needed to repair some of the floor here. The boards were in bad shape
-
Image
8
- A new socket, all filled and ready to be sanded and painted
-
Image
9
- Housing the wireless switching packs on this rewire
-
Image
10
- An example of our wireless switches
-
Image
11
- New unit fitted as part of a rewire
-
Image
12
- New consumer unit fitted
-
Image
13
- New RCBO unit fitted to this 3 bedroom house
-
Image
14
- No isolator for air con unit. Keep it cool
-
Image
15
- Upgraded security light on this garage overlooking the drive
-
Image
16
- Air con isolator - Keeping it cool in Norfolk
-
Image
17
- Wiring - IN
-
Image
18
- New vehicle charging station. Techy unit this!
-
Image
19
- Fusebox about to be ripped out
-
Image
20
- New RCBO board in, tested, labelled, sorted!
-
Image
21
- Keeping it neat for the next guy! - You're welcome :)
-
Image
22
- Wireless switches - labelled for user ease
-
Image
23
- Part of a 2-way switching. Keeping it easy
-
Image
24
- ECS gold card. Ben Grant makes the grade
-
Image
25
- 2nd fix to MK double socket outlet. Not the cheapest, but the most reliable in the price range by far.
-
Image
26
- The MK FCU is a really good accessory. The terminals are very reliable and lined up making cable sweeping very easy.
-
Image
27
- This picture was taken during a callout. It may not be clear from the photo, but the middle circuit has suffered serious heat damage due to a loose connection
-
Image
28
- This little hole I made exposed the conduit in the wall supplying a socket below. Accessing meant that I could run an additional cable down to the lights for the cabinet without having to cut open the wall.
-
Image
29
- Here, an additional cable has been ran through the existing conduit from the loft to supply the under cabinet lights. The hole cannot be seen from a standing point, so it has meant there is no need for invasive repair works to the wall
-
Image
30
- The customer had asked for a board change. The practical problems around swapping out this switchgear is age. The units here feed wiring that is 60+ years old. Many additions have been carried out in that time.
-
Image
31
- All the old switchgear has been taken away and the cables brought into 1 unit. This allowed for a full system test and inspection to be carried out. This work hasn't finished, but we now have clarity as to the condition of the old wiring.
-
Image
32
- This is the main unit of a large home with 2 units. Part of a TT earth supply (power comes in off a pole), an RCD main switch was fitted. So that this RCD wouldn't trip, multiple RCD devices were installed, and this has meant the power interruptions have stopped.
-
Image
33
- First fix to a kitchen completed. Ready for the kitchen fitter and the tiler. Customer was happy that the channels were filled in before we left; meaning no need to hire a plasterer.
-
Image
34
- Fusebox are a popular brand. This board has allowed quick testing and inspection to the wiring to clear faults and bring the installation up to code.
-
Image
35
- Tiles completed on this kitchen job. Just wiring up the hob in this picture.
-
Image
36
- There are 3 elements here: The light, the sensor, and the connection. If the light fails its easy to swap out. The same is true of the sensor. This way, repair costs are actually lower because the system is so much more reliable due to better quality, individual components.
-
Image
37
- Quick TV install. Single socket was installed behind this TV to supply power. Super flat bracket supplied and fitted.
-
Image
38
- There are two types of cable being used here. The armour cable is too heavy for a plastic outdoor socket, so a outside connection unit allows for the cable to be joined, and a suitable cable installed to go into the socket. This massively increases the systems life expectancy.
-
Image
39
- Mounting a socket outlet in the flower bed: the use of postcrete to fix the unistrut supporting the socket outlet meant it will stand for many years of use.
-
Image
40
- Fully waterproof socket outlet to supply a pond pump. This socket outlet is fed via a timer in an outdoor connection box around 2 meters away
-
Image
41
- Socket outlet with the lid down. Fully waterproof and ready to use any time of the year.
-
Image
42
- The SYNC EV from BG used in this installation for a new Nissan EV. Pairing was straightforward and would use these BG chargers again.
-
Image
43
- RCBO's bring together RCD's and MCB's. They cost a little more, but there are some major benefits to be had. Wiring is tidy making inspection easy.
-
Image
44
- Fitted an emergency light here as the power was constantly going off. The emergency light meant the customer could see the fusebox when the lights went off.
-
Image
45
- This Fusebox was installed to replace the 1980's unit. The customer required an update due to power problems and the need to supply a new vehicle charger.
-
Image
46
- Found this whilst testing electrics during a consumer unit upgrade - The cables has shorted some time ago and had created a fault - super happy to have found this so quickly - got it repaired, and the power back on
-
Image
47
- Just a hint of a cable that has been chewed by rats. The extent of the damage was enormous - the entire back of house had been damaged and needed rewiring.
-
Image
48
- Flat roof - Can't lift the floors - only option is to cut holes in the ceiling. Rodents has chewed their way through cabling so we needed to rip it out and run new wires
-
Image
49
- New bathroom light installed following major rodent damage. The lights had been out for months - homeowner is so grateful to be seeing in the bathroom again
-
Image
50
- Old with older style halogens and in with newer, more efficient LED fixtures
-
Image
51
- Based in Thorpe St Andrew
-
Image
52
- This is an inline fan. Difficult to fit in this loft. Its high power output will mean there should be no trouble with condensed air
-
Image
53
- We installed cable tray to support all the power and data in this large scale log cabin in the grounds of a country cottage
-
Image
54
- Here we have the walls of this log cabin unit still open as we finish running all the wires in
-
Image
55
- We partially rewired this home. Here we have some close cut chasing which will need minimal repairs.
-
Image
56
- We often use bonding to fill the chases in once we have ran our cabling
-
Image
57
- We supplied Crabtree sockets here to match the existing Crabtree accessories
-
Image
58
- Testing the system to ensure it is safe and wired correctly
-
Image
59
- This run of steel trunking was installed the 10m vertical height of this windmill rewire near Wyndham
-
Image
60
- Here we are running in 20mm PVC conduit to our main trunking to supply power and lights in singles.
-
Image
61
- Couldn't run these straight... The walls lean into the room as the building in conical. Going round this doorway was particularly interesting.
-
Image
62
- We needed a small length of trunking to go between these two angles as the offset was about 10mm longer than the angles.
-
Image
63
- Wiring in for socket outlets here in a windmill rewire. We're about half way through here.
-
Image
64
- Use of conduit was needed as the floors couldn't be lifted
-
Image
65
- Commercial wiring here in a Windmill. Part of a new wiring system
-
Image
66
- A wiring centre that is still being added to in the loft. This is running 6 banks of lights with room for more equipment
-
Image
67
- We have installed these plastic accessory boxes to accommodate the wireless switching packs for the lighting in the building
-
Image
68
- The sticky pads that come with these switches allow for them to be fixed to glass
-
Image
69
- These are our wireless switches. Here, we have used the sticky back pads on the glass for the outside light.
-
Image
70
- Mid way through wiring in some additional sockets
-
Image
71
- Additional socket outlets in a kitchen. This was a very economical way to add alot of sockets
-
Image
72
- The customer needed a light for the bins, this is functional and stylish. The bricks were preserved
-
Image
73
- We installed two of these pendants to brighten up the hallway
-
Image
74
- These fixtures have just been installed. The cables will straighten out over time
-
Image
75
- These lamps are a fillament look which add comfort to the lamp
-
Image
76
- Modern pendant but with a vintage feel and lamp
-
Image
77
- This is one of our wireless switches - Installed with no damage to the wall paper
-
Image
78
- This is an 'in-progress' from a kitchen installation. The wiring was 40 years old, so we removed it all, and installed new circuits for all the equipment. The kitchen looks great now.
-
Image
79
- The customer had this Lutron 4 channel lighting controller. We adjusted the dimming settings to reflect their routine and assigned scene control for each of them
-
Image
80
- This is the wall before we mounted the customers TV. Their reason for mounting was because of young toddlers running around. Plus, they wanted to free up space on the cabinets surface.
-
Image
81
- Simple TV mount. As the cabling was too short, we needed to order up longer leads for the HDMI and the power supply. This way, were able to get around the need for invasive channelling in the walls and install discreet trunking systems.
-
Image
82
- These are a series of LED tape lights that have been installed to the underside of the stair nosing. In this picture, its now ready for the painter to finish the staircase in a Navy blue.
WTTTL Ltd
- Identification checked
- Company address verified
- Customer references checked
- Agreed to TrustATrader's high standards
- Agreed to complaints procedure
Insurance details
| Provider | SB-Simply Business |
|---|---|
| Verified | 16th June 2023 |
Norfolk
NR7 0JG
Qualifications
- NICEIC - Approved Contractor
- City & Guilds
- Summit Skills
Associations
Reviews (20)
-
Average rating: 5.0 out of 5
Review by Rob
on 26th September 2023
"Used Ben / W3TL for 2 projects now, air con installation and garage conversion. Was available to give advice on both jobs before they started, turned up when he said he would and provided a quality service. Would highly recommend this company."
- Initial impression Initial impression: 5 out of 5.0
- Punctuality Punctuality: 5 out of 5.0
- Cleanliness Cleanliness: 5 out of 5.0
- Quality Quality: 5 out of 5.0
- Value Value: 5 out of 5.0
- Overall opinion Overall opinion: 5 out of 5.0
-
Average rating: 5.0 out of 5
Review by David
on 18th September 2023
"We had a wiring fault causing the RCD on our consumer unit to trip, knocking out the circuit in our kitchen. Ben came out same day, identified the cause of the fault and whilst doing so explained what he was doing and what caused the issue. He also disconnected the integrated fridge and freezer we need to remove whilst on the visit! Absolutely great service, friendly, professional, and excellent at describing his process. Cannot recommend highly enough!"
Trader reply: "So great to read this David, and thank you for taking the time to leave this review. I'm glad you both enjoyed the process and had such a positive experience. You know where I am when you need"
- Initial impression Initial impression: 5 out of 5.0
- Punctuality Punctuality: 5 out of 5.0
- Cleanliness Cleanliness: 5 out of 5.0
- Quality Quality: 5 out of 5.0
- Value Value: 5 out of 5.0
- Overall opinion Overall opinion: 5 out of 5.0
-
Average rating: 5.0 out of 5
Review by Candy Coghlan
on 20th July 2023
"Ben was highly skilled, professional, patient, explained electrical question we had and identified the electrical problem and fixed it! Very reasonable priced. Highly recommended! Will definitely use for future electrical issues."
- Initial impression Initial impression: 5 out of 5.0
- Punctuality Punctuality: 5 out of 5.0
- Cleanliness Cleanliness: 5 out of 5.0
- Quality Quality: 5 out of 5.0
- Value Value: 5 out of 5.0
- Overall opinion Overall opinion: 5 out of 5.0
-
Average rating: 5.0 out of 5
Review by Tess
on 26th April 2023
"Ben Grant very kindly fitted me in promptly as an emergency (no power). He was friendly & personable, quickly identified the problem and got the power back on. Would definitely recommend him and will happily hire his services in future."
- Initial impression Initial impression: 5 out of 5.0
- Punctuality Punctuality: 5 out of 5.0
- Cleanliness Cleanliness: 5 out of 5.0
- Quality Quality: 5 out of 5.0
- Value Value: 5 out of 5.0
- Overall opinion Overall opinion: 5 out of 5.0
Feeling social?
See more of what we do and give us a follow on our social media.